Nadco Tapes and Labels, Inc.

Thomas Verified

Grit Safety Tape helps to prevent injuries caused by falling or slipping on ladders, stairs, ramps and more. This tape is created with a coarse mineral coating that allows for excellent traction.

189 Y/B is a mineral-coated film non-slip tape, possessing one side that is pressure sensitive. This anti-slip grit tape is protected by a removable liner.

514 is a double coated polyester (PET) film tape coated on both sides with a versatile acrylic pressure sensitive adhesive (PSA). A versatile, cost effective automotive tape specifically designed for demanding bonding applications, 514 provides permanent bond on foams, More... plastics, metals, and composite materials subjected to a broad range of environmental conditions.Typical values are not intended to be used for specification development. Technical data is believed to be true and accurate; NADCO® recommends that the purchaser test for fitness of use in all applications. Less

1520CW Aluminum Foil Tape is a 2 mil, (50 micron) high strength aluminum foil tape coated with an aggressive, high temperature, acrylic adhesive system. The foil tape conforms well to both fibrous and sheet metal ducts, providing an excellent vapor seal. The malleable More... foil tape also conforms well around corners and to irregular surfaces. Coated with a special cold weather acrylic pressure sensitive adhesive system which combines superior quick stick at normal temperatures, as well as superior low temperature (below freezing) performance, this is the ultimate in cold weather foil tapes. Recommended to use at normal and elevated temperatures as well. Less

This product consists of a 2 mil (50 micron), premium dead soft, high strength aluminum foil coated with a specially formulated conductive pressure sensitive acrylic adhesive system. This foil tape offers superior adhesion, malleability, and adhesive conductivity, allowing More... for extremely low resistance, which make this an excellent shielding tape. Less

1697 Copper Foil Shielding Tape is a 1.4 mil (36 micron) premium dead soft, zero temper, high tensile copper foil tape coated with an aggressive, conductive acrylic pressure sensitive adhesive. These foil tapes offer superior adhesion, malleability, and adhesive conductivity, More... allowing for extremely low resistance, making this an excellent shielding tape.  Less

In emergency situations, there is always the possibility of panic and the risk of serious injury due to slips and falls. Glo Brite Safety Track is a non-skid, mineral-coated photoluminescent glow in the dark tape that provides unsurpassed, non-slip protection on hazardous More... surfaces. Because Glo Brite Safety Track absorbs and stores energy from ambient light, this glow in the dark tape is instantly visible in the event of darkness. Glo Brite Safety Track easily adheres to most surfaces, making this glow in the dark tape ideal for stairs and other potentially slick surfaces that are part of your low-level emergency egress system. Less

3680 is a double coated polyester (PET) film tape coated on both sides with a high performance acrylic pressure sensitive adhesive (PSA). A versatile automotive tape specifically designed for low surface energy and difficult to bond applications, 3680 provides a permanent More... bond on foams, plastics, metals, and composite materials subjected to a broad range of environmental conditions. Less

A 2 mil (50 micron) glass reinforced transfer tape with an aggressive acrylic pressure sensitive transfer adhesive and excellent oxidation and ultraviolet light resistance. Designed for both interior and exterior applications. This transfer film has good quick stick More... and high shear properties, and wets out to metals, high surface energy plastics, most elastomers and treated olefins and coated and plain papers. Less

Our glow in the dark safety track tape contains a flexible laminated film coating with permanent acrylic pressure sensitive adhesive, and is backed with poly coated release liner. Safety grade photoluminescent material is designed to glow 24+ hours. This glow in the More... dark tape withstands UV-light and does not show significant degradation when used outdoors. Less

711-2 Series Reflective Tape is a high quality, durable, self-adhesive, prismatic lens retroreflective material. It is designed for use on vehicles for easy nighttime vehicle recognition.

This glow in the dark photoluminescent material tape possesses a flexible laminated film coating with permanent acrylic pressure sensitive adhesive, and is backed with a poly coated release liner. Our promotional grade photoluminescent material is designed to glow 1+ More... hours. Less

This is a top coated hard clear polypropylene film coated with a low adhesion removable pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties.

PF14 paper tape is a medium tensile strength, pressure-sensitive, kraft flatback, paper packaging and identification tape designed for lightweight packaging, bag locking, decorative edging, marking and color coding. This paper tape possesses a specially formulated adhesive More... which provides easier unwind capabilities while exhibiting an excellent balance of face to face adhesion and quick stick characteristics. It is printable with standard flexographic ink. Less

PM200 is a UL-recognized/CSA-accepted 2.0 mil ink-receptive white polyester coated with an aggressive, high-performance, permanent pressure-sensitive acrylic adhesive and backed with a 50 lb. bleached kraft roll form release liner.

This is a clear polyester film coated with a permanent pressure sensitive acrylic adhesive and backed with a semi-bleached release liner.

This is a topcoated hard clear polypropylene tape coated with a reworkable permanent pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties.

This is a topcoated hard clear polypropylene tape coated with a low adhesion removable pressure sensitive acrylic adhesive and backed with an ultra smooth clear polyester release liner. Release liner has excellent roll tracking properties.

High Intensity Grade Reflective Sheeting is a high-quality, durable micro-prismatic retro reflective material. Its unique prismatic construction provides an extra high level of reflectivity for demanding traffic control situations. Meets applicable requirements for More... high intensity grade sheeting applications for Types III and IV retro reflective sheeting as set forth in ASTM D 4956. Less

Engineer Grade Reflective Sheeting is a high-quality, durable enclosed lens retro reflective material. This reflective sheeting offers exceptional value for permanent traffic signage applications. Meets applicable requirements for engineer grade sheeting application More... for Type I retro reflective sheeting as set forth in ASTM D 4956-99. Less

T188 series consist of DuPont Type H Kapton film, coated with a high hold, acrylic type, pressure sensitive adhesive and protected with a treated, easy release, paper liner.

This is a top coated tamper evident metalized silver void polyester film coated with a permanent pressure sensitive adhesive and backed with a two-sided poly coated flat release liner.

Lightweight, black, moisture-resistant, medium crepe paper masking tape with a pressure-sensitive natural rubber adhesive. The black color imparts moderate resistance to Ultra Violet light. NCWT1 Mosisture-Resistant Masking Tape

Vinyl Anti-Slip Tape is characterized by moderate tensile strength, high elongation and good tear strength. Calendering has built in stresses that are common cause vinyl shrinkage and affect dimensional stability.

This is a top coated hard white polypropylene film coated with a permanent pressure sensitive acrylic adhesive and backed with a semi-bleached kraft release liner.

Polyethylene coated cloth tape with an aggressive natural rubber pressure-sensitive adhesive. Product is designed to answer the need for an economical approach to applications.

Description: Durable rubber product engineered to meet requirements for protective masking of surfaces during dry paint stripping process. Aggressive acrylic pressure-sensitive adhesive provides instant adhesion to clean/dry surfaces with little to no hot glue required More... on edges to prevent media intrusion. Remains flexible and resists cracking and lifting. Uniform thickness allows maximum blast times. Applications: For masking of surfaces Blast Tape (dry strip paint removal) or other short-peen processes. This tape prevents small particles of blast media and other foreign debris from infiltrating and damaging sensitive surfaces, components and control systems. BT-100 Blast Tape Less

This barefoot friendly non-slip tape possesses a long shelf-life, "write-on" capability and is compliant with many OSHA Requirements. Designed to be an extra precaution in accident prone locations, it is highly conformable and resistant to aging and a variety corrosive More... chemicals. Less

NADCO® Silicone Splicing Tape 981 is a thin, strong polyester (PET) splicing tape coated with a specially formulated silicone pressure sensitive adhesive (PSA). Specifically designed as a high performance splicing tape, NADCO® tape 981 performs in high temperature More... applications. NADCO® 981 is available in blue and yellow. Less

A strong 10 mil (250 micron), transparent ultra high molecular weight polyethylene film coated with a high peel, high shear, rubber-based pressure sensitive adhesive.

This is a top coated tamper evident metallized silver void polyester film coated with a permanent pressure sensitive adhesive and backed with a two-sided poly coated flat release liner.

A high temperature pressure-sensitive masking tape designed for clean removal from a variety of surfaces after exposure to oven temperatures up to 325 ºF (163 ºC) for 30 minutes. (Times and temperature are determined by surface). Not recommended for outdoor More... use. PG-21 performs well in wet strip applications. Its easy handling, smooth crepe backing exhibits high strength, excellent conformability to irregular surfaces, and exceptional cornering. Provides resistance to paint flaking and a clean, well defined paint line. Less

A Gray Foamed Acrylic adhesive with a special composition giving excellent all around bonding properties and unique characteristics that allows for very high performance in the most demanding of applications. The pressure sensitive acrylic composition provides for very More... good tack, excellent adhesion to variety of surfaces and high shear strength performance. Tape is carried on a Red, release coated Polyethylene Liner that is easily removed. Less

A Black Foamed Acrylic adhesive with a special composition giving excellent all around bonding properties and unique characteristics that allows for very high performance in the most demanding of applications. The pressure sensitive acrylic composition provides for More... very good tack, excellent adhesion to variety of surfaces and high shear strength performance. Tape is carried on a Red, release coated Polyethylene Liner that is easily removed. Less

3232 is a 1/32" thick white closed cell, cross-linked polyethylene foam coated on both sides with a high performance acrylic based adhesive with a white kraft liner.

Tissue paper, coated both sides with an aggressive pressure sensitive acrylic adhesive that is engineered to bond to almost any surface. Features a 53# glassine kraft paper liner (white).

711-2 Flexible Prismatic Conspicuity Markings Series 963 are highly retroreflective flexible microprismatic markings designed to mark the sides and rear of vehicles for enhanced visibility and detection. The reflective marking consists of prismatic lenses that are formed More... in a transparent, synthetic resin, reflectorized and backed with a pressure sensitive adhesive and paper liner. Series 963 meets or exceed all FMVSS 108 requirements. Less

Part # 1001 silicone transfer adhesive is designed for high performance applications requiring chemical resistance, excellent bond strength and resistance to extreme temperatures (-300 ºF to 500 ºF). The 2 & 5 mil silicone adhesive is protected by two clear More... polyester film liners. Part # 1001 bonds well to metals, silicone foam, most plastics and low energy surfaces such as polyethylene and polypropylene. Less

"NADCO has been supplying individuals, small businesses and large corporations worldwide with printed and non-printed tapes for over 35 years.Because of this, we've gained exceptional knowledge and expertise in this field, making us the perfect company to partner More... with for all your pressure sensitive (and non-pressure sensitive) tape and label needs.We manufacture tapes of all kinds including, but not limited to: Masking Tapes, High-Grade Painters Tape, Vinyl Tapes (clear, white or colored), Paper Tapes, Autoclave, Filament Tapes, Clear Carton Sealing Tapes, Barricade Tapes, Foil Tapes, Cloth Tapes (Gaffers), Anti-Slip Tapes, Glow-in-the-dark Tapes and Duct Tapes, most of which can accept a custom print and can be supplied as a ‘self-wound’ product or with a release liner.Many companies enjoy a significant cost savings when using printed carton-sealing tapes as opposed to printed boxes while shipping their products. Other industries use our tapes for marking pipes, electrical lines or other hazards in the workplace, including the most recent need for Social Distancing/Floor Marking tapes.We also print a large array of various tapes and labels specifically for use in the Nuclear Industry.Serving such a diverse customer base requires our team to be up to date on the latest industry research so we can confidently recommend surface substrates, over-lams, varnishes and adhesives that will provide the absolute best result for your specific application.Contact us today where a team member will be happy to help you choose just the right tape for your next project!" Less